Manual Rotary Drum Pump With 2" Bung
SKU
RP-90R/GT147
Currently out of stock. You may be interested in the following alternatives:
Specification
| Length - mm | 1320 |
|---|---|
| Weight - kg | 1.6 |
| Capacity - Litres | 205 |
| WRAS Approved | No |
| Flow Rate | 37.85 L/Min |
| Float Switch | No |
| Construction Material | Polyethylene |
| Warranty | 1 Year |
Details
- Liquid is transferred from the drum to a separate container with ease
- Can be used to dispense oils, antifreeze, degreaser, and other non-corrosive fluids
- Manually powered so it can be taken anywhere
- Quick liquid flow rate of 37.85 L/Min
- Multiple uses - 205 litre steel or plastic drums with a 2" BSP fitting
- Easy to use - place it into the drum, screw the adapter on, and rotate the crank
Essential when transferring liquid from one drum to another, our manual rotary pump can dispense hazardous or non-hazardous liquid quickly and smoothly. The pump is suitable for 205 litre drums that have a 2" BSP fitting to allow the suction tube to make its way into the drum and allows the pump to fasten onto the drum.
The pump is remarkably simple to install and use:
- Place the pump into the drum,
- Screw the adapter onto the drum.
- Crank the handle in a clockwise motion and the liquid will begin to dispense.
A threaded adaptor is available with the pump which helps to tighten the pump to the drum. After it has been used, simply do the reverse of this, and give it a quick wipe, ready for the next use.
Please note: the steel drum is not included. The pump requires lubrication to allow it to run smoothly.