Whale GP1352 Submersible Fluid & Diesel Transfer Pump – 13 Litres / Min
Specification
Width - mm | 36 |
---|---|
Height - mm | 129 |
WRAS Approved | No |
Voltage | 13 |
Float Switch | No |
Warranty | 1 Year |
Details
The second best-selling pump to the original GP1002, The GP1352 is a premium-filtered pump suitable for multiple outlets, such as pressure switch & microswitch systems. It features a compact and quiet design and pumps a maximum of 13 litres of water per minute.
Ideal for a range of applications where a mains power source is not available, the GP1352 is especially useful within the farming and agriculture industries for applications such as pumping water in or out of an IBC, transferring red diesel from a container into a fuel tank, and pumping water, milk or liquid feed to an animal feeding trough
Features:
- 1-year warranty
- Includes blue filter cap to prevent pumping pieces of debris
- Suitable for pressure switch & microswitch systems
- Compact, quiet & lightweight
- Suitable for external pumping containers
- Suitable for transferring fresh and salt water, diesel, pesticides
- Multiple pumps can be used inline to boost flow rates
Manufactured from high-quality moulded parts and a robust 12-volt motor, this pump weighs 0.15kg and fits unsupported into pipework. Please note: we recommend the pump stands vertically in the tank.
The materials that make contact with the water are: pump body (ABS), seals (Nitrile), strainer (polypropylene), impeller (stainless steel), cable (PVC).
It connects to a 10mm or 13mm flexible bore hose and the pump uses a 5 amp automotive fuse.
For Best Performance:
- Do not run dry: this may cause damage
- Maximum continuous operation should not exceed 15 minutes
- Not suitable for pump water above 60C
- Before switching on, place the pump in water and shake for a few seconds; this will ensure successful priming and should be repeated after re-filling the tank
Specifications:
- Height: 129mm
- Width: 36mm
- Weight: 0.15kg
- Voltage: 12
- Construction materials: polypropylene, Nitrile, ABS, PVC, and stainless steel
This pump is suitable for cold and warm water, diesel, light oils and water-based fluids. It is ideal for use within caravans, boats, and motorhomes.
Please note: this pump not suitable for use with petrol or any highly flammable or corrosive liquids. If the pump is installed in an outdoor environment, during the winter, the pump needs to be winterised and protected from low temperatures when not in use.